EasyManuals Logo

Grandstream Networks UCM630X Series User Manual

Grandstream Networks UCM630X Series
591 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #416 background imageLoading...
Page #416 background image
P a g e | 416
UCM630X Series User Manual
Version 1.0.11.10
Options:
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
Enable Recording Whitelist
Enable the Recording Whitelist feature
Recording Operation Whitelist
Select extension in the whitelist that can use the *3 recording
function.
Feature Code Digits Timeout
Set the maximum interval (ms) between digits for feature code
activation
DND/Call Forward
Do Not Disturb (DND) Activate
Default code: *77
Do Not Disturb (DND) Deactivate
Default code: *78
Call Forward Busy Activate
Default Code: *90
Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward Busy Deactivate
Default Code: *91
Call Forward No Answer Activate
Default Code: *92
Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward No Answer
Deactivate
Default Code: *93
Call Forward Unconditional
Activate
Default Code: *72
Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.

Table of Contents

Other manuals for Grandstream Networks UCM630X Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks UCM630X Series and is the answer not in the manual?

Grandstream Networks UCM630X Series Specifications

General IconGeneral
BrandGrandstream Networks
ModelUCM630X Series
CategoryConference System
LanguageEnglish

Related product manuals