Graphite 59G370 - Page 22

22
Protection class II
Cutting blade diameter 125 mm
Inner diameter of cutting blade 22,2 mm
Spindle thread diameter M14
Chase width range 8 - 26mm
Chase depth range 8 - 30 mm
Weight 4,2 kg
Year of production 2016
NOISE LEVEL AND VIBRATION PARAMETERS
Information regarding noise and vibration
The following levels of emitted noise, such as emitted acoustic pressure Lp
A
and acoustic power level Lw
A
and measurement uncertainty K have been given in the instruction manual as dened in the EN 60745
standard.
The following vibration value (acceleration value) a
h
and measurement uncertainty K have been determined
as dened in the EN 60745-2-22 standard.
The vibration level provided in this instruction manual have been determined according to the measurement
procedure as dened in the EN 60745 standard and can be used for comparison of power tools. This can be
used for preliminary assessment of exposure to vibrations.
The provided vibration level is representative for main applications of the power tool. If the power tool is
used for other applications or with other working tools, and if it is not suciently maintained, the vibration
level may vary. The aforementioned reasons may increase the exposure to vibrations during the entire
operating period.
In order to precisely estimate the exposure to vibrations, periods should be accounted for, in which the
power tool is switched o, or when it is switched on, but not operated. Thus, the total exposure to vibration
may prove considerably lower.
Additional safety measures should be taken to protect the user against eects of vibrations, such as:
maintenance of the power tool and its working tools, ensuring proper temperature of the hands and proper
organisation of work.
Sound pressure: Lp
A = 97,16 dB(A) K = 3 dB(A)
Sound power: Lw
A
= 108,16 dB(A) K = 3 dB(A)
Vibration acceleration: a
h
= 7,451 m/s
2
K = 1,5 m /s
2
ENVIRONMENT PROTECTION
Do not dispose of electrically powered products with household wastes, they should be utilized
in proper plants. Obtain information on waste utilization from your seller or local authorities.
Used up electric and electronic equipment contains substances active in natural environment.
Unrecycled equipment constitutes a potential risk for environment and human health.
* Right to introduce changes is reserved.
“Grupa Topex Spółka z ograniczoną odpowiedzialnością” Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa
Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes,
drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related
Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments).
Copying, processing, publishing, modications for commercial purposes of the entire Instruction or its parts without written permission of
Grupa Topex are strictly forbidden and may cause civil and legal liability.