GRASS VALLEY ADVC3000 - Introduction; Package Contents

Chapter 1 - Introduction
10
1 Introduction
1-1. Package contents
Please verify that the following items are included in the ADVC3000 package. If any of the components
are missing, please contact Canopus Customer Support.
• 1 x ADVC3000 unit
• 1 x Power cord
• 1 x Power cord clamp
(to prevent the power cord from accidentally pulling out)
• 1 x DV cable [6 pin - 4 pin]
• 2 x Rack-mount brackets
• 4 x Attachment screws
• 1 x ADVC3000 User Manual (this document)
When mounting the ADVC3000 on a rack:
1. Use a Phillips-head screwdriver to remove the four rubber feet from the bottom of
the unit.
2. Attach the rack-mount bracket to the ADVC3000 unit with the screws provided.
12
ψ
ψ
1. Insert.
2. Adjust the position.
3. Snap
close.