5
HPE-300/HPE-300-2AC
User’s Guide
Mounting
Three options for installation in a rack or for standalone operation are available:
• HPE-TRAY (rack mounting shelf)
• HPE-HANDIPAK (feet and handle kit)
• HPE-ENCL (splash proof enclosure)
Rack mounting (HPE-TRAY)
Use the HPE-TRAY rack mounting option to install up to 3 units into a standard width 19”
rack space. The HPE-TRAY package contains the mounting tray and a front locking bracket.
Remove the locking bracket by loosening the two thumb screws at the sides:
Install the HPE-TRAY into a standard 2RU 19” rack space. Secure the tray in the rack by using
the proper screws and/or nuts (refer to the instructions and materials of your 19” rack).
Before placing an HPE-300/HPE-300-2AC unit, remove the four rubber feet from the bottom
plate:
locking bracket
mounting tray
To Next Page
Loading...