Compatible K2 Lx0 RAID components
This compatibility specification applies to K2 RAID on a Level 10, Level 20, Level
30 and Level 35 (Condor) K2 SAN, both basic and redundant. RAID firmware is
compatible with this release of K2 software as follows:
CommentsFile NameVersionComponent
This version is still compatible
for 300 and 450 GB drives
D1_07VS.BIN07VSLevel 10/20 controller firmware
for primary chassis with 15K
SAS drives or SATA drives
This version is still compatible
for 300 and 450 GB drives
D1_07VV.BIN07VV
This version required for 600
GB drives, recommended for
D1_07VW.BIN07VW
300 and 450 GB drives.
Requires 050B for expansion
chassis.
This version is still compatible
for 300 and 450 GB drives with
ENCL_030F.BIN030FLevel 10/20 controller firmware
for expansion chassis with 15K
SAS drives or SATA drives 07VS or 07VV controller
firmware.
This version is compatible for
300 and 450 GB with 07VS,
ENCL_050B.BIN050B
07VV, or 07VW controller
firmware. Required for 600 GB
drives with 07VW controller
firmware.
7.2K SAS drives are used in K2
Production Storage and K2
Nearline Storage.
D1_07VV.BIN07VVLevel 10/20 controller firmware
for primary chassis with 7.2K
SAS drives
ENCL_050B.BIN050BLevel 10/20 controller firmware
for expansion chassis with 7.2K
SAS drives
This version is still compatible
for 300 and 450 GB drives
D3_07VS.BIN07VSLevel 30/35 controller firmware
for primary chassis with 15K
SAS drives or SATA drives
This version is still compatible
for 300 and 450 GB drives
D3_07VV.BIN07VV
This version required for 600
GB drives, recommended for
D3_07VW.BIN07VW
300 and 450 GB drives.
Requires 050B for expansion
chassis.
This version is still compatible
for 300 and 450 GB drives with
ENCL_030F.BIN030FLevel 30/35 controller firmware
for expansion chassis with 15K
SAS drives or SATA drives
12 May 2010 K2 Version 7.2.7 Release Notes & Upgrade Instructions 15
Version compatibility