Navigate to C:\Windows\Microsoft.NET\Framework\v2.0.50727.a)
b) Check file properties. The following properties indicate that version
2.0.50727.4022 is already installed:
Platform
Time
Date
File sizeFile versionFile name
x86
04:56
11-Mar-2009989,000
2.0.50727.4022
mscordacwks.dll
x86
04:56
11-Mar-2009
4,550,6562.0.50727.4022
mscorlib.dll
x86
04:56
11-Mar-2009
5,812,5442.0.50727.4022
mscorwks.dll
x86
04:56
11-Mar-2009
388,936
2.0.50727.4022
sos.dll
c) If the update is necessary, continue with this procedure.
2. Access the upgrade files and double-click NDP20SP2-KB968760-x86.exe.
The installation wizard opens.
3. Work through the wizard, accepting all default settings, and finish.
4. Restart as prompted.
Install High Priority Windows updates (recommended)
• Windows “High Priority” updates are recommended, but not required. While you
have devices in an offline state to upgrade software, you should check to see if
there are any new updates that you need to install. Use standard Windows
procedures.
CAUTION: Only “High Priority Updates” should be installed. Do not
install other Windows or driver updates unless specifically directed by
product documentation or by Grass Valley Support.
Upgrade QuickTime
Do not do this task if:
• QuickTime is currently at version 7.6 or higher.
Do this task if:
• QuickTime is at a version lower than 7.6.
1. Access the QuickTime installation files.
2. Locate and open the following QuickTime install file:
QuickTimeInstaller-7.6.exe
3. Work through the install wizard.
Configure settings so that the software does not automatically update Quicktime
and other Apple software.
12 May 2010 K2 Version 7.2.7 Release Notes & Upgrade Instructions 27
Upgrading K2 systems
To Next Page
Loading...
