GRASS VALLEY K2 - Upgrade LSI RAID Controller Driver

NOTE: Do not install general Windows updates as available from Microsoft. Update only
as directed by Grass Valley.
1. If you are not sure of the Windows update version currently installed, do the
following:
a) Navigate to C:\Windows\Microsoft.NET\Framework\v2.0.50727.
b) Check file properties. The following properties indicate that version
2.0.50727.4022 is already installed:
Platform
Time
Date
File sizeFile versionFile name
x86
04:56
11-Mar-2009989,000
2.0.50727.4022
mscordacwks.dll
x86
04:56
11-Mar-2009
4,550,6562.0.50727.4022
mscorlib.dll
x86
04:56
11-Mar-2009
5,812,5442.0.50727.4022
mscorwks.dll
x86
04:56
11-Mar-2009
388,936
2.0.50727.4022
sos.dll
c) If the update is necessary, continue with this procedure.
2. Access the upgrade files and double-click NDP20SP2-KB968760-x86.exe.
The installation wizard opens.
3. Work through the wizard, accepting all default settings, and finish.
4. Restart as prompted.
Upgrade LSI RAID controller driver
Do not do this task if:
• A K2 Solo Media Server
• A K2 Summit Production Client with direct-connect storage
• A K2 Summit Production Client installed new with K2 software version 7.1.x or
higher, in which case the driver is pre-installed at version 3.10.0.32.
• A K2 Summit Production Client with the driver already upgraded to version
3.10.0.32.
Do this task if:
• A K2 Summit Production Client with internal storage and a driver at a version
lower than 3.10.0.32.
1. If you are not sure of the driver version currently installed, do the following:
a) open Windows Device Manager | SCSI and RAID controllers | LSI MegaRAID SAS
PCI Express ROMB | Properties | Driver.
b) Check file properties. The following properties indicate that version 3.10.0.32
is already installed:
Date
Version
7/22/20093.10.0.32
56 K2 Version 7.2.7 Release Notes & Upgrade Instructions 12 May 2010
Upgrading K2 systems