Install K2 Dyno Server software
If the K2 Dyno Server software was previously installed, you must uninstall the
software before you use these steps to install.
If you have not already done so, disable the write filter on the K2 Summit Production
Client or K2 Solo Media Server.
1. From the K2 Summit Production Client or K2 Solo Media Server, access the K2
Dyno Server software installation files.
2. In the Server directory, locate and open the following file:
setup.exe
3. Follow the onscreen instructions, and work through each page.
4. Click Next and Finish to complete the installation.
5. Restart the K2 Summit Production Client or K2 Solo Media Server.
On the K2 Summit Production Client or K2 Solo Media Server, in Configuration
Manager on the Ganging tab, make sure that Use a single channel to control the
gang or Record/play same clip on all channels of Gang is not selected.
Lock K2 Summit Production Clients
This task enables the write filter on a K2 Summit Production Client or on a group of
K2 Summit Production Clients.
Prerequisites for this task are as follows:
• The device or all the devices in the group are communicating correctly in
SiteConfig. This is indicated by the green star icon overlay.
• The device or all the devices in the group are currently unlocked. This is indicated
by the red lock icon overlay.
1. In the Network Configuration | Devices tree view or the Software Deployment |
Deployment Groups tree view, identify the device or the group of devices that you
intend to lock.
2. Right-click the device or the group and select Lock.
A “…may require restart…” message appears.
3. Click Yes to allow SiteConfig to restart the device or devices.
The Locking Devices window opens and displays progress.
4. When the Locking Devices window reports that the lock process completed
successfully, click Close.
The device or devices are now locked. For K2 Summit/Solo, this also enables the write
filter, which enforces the restart.
12 May 2010 K2 Version 7.2.7 Release Notes & Upgrade Instructions 65
Upgrading K2 systems
To Next Page
Loading...
