Upgrade K2 Dyno Controller
Do not do the tasks in this section if:
• The K2 Summit Production Client or K2 Solo Media Server is not controlled by
a K2 Dyno Controller.
Do the tasks in this section if:
• The K2 Summit Production Client or K2 Solo Media Server is controlled by a K2
Dyno Controller and you need to upgrade software on the K2 Dyno Controller.
Refer to compatibility specifications to determine if you need to upgrade.
Before upgrading a K2 Dyno Controller, verify the following:
• You have access to the software installation files for this release. Procure the files
via the appropriate distibution method, such as download, CD-ROM, network
drive, or external drive.
• You have a recovery image for the K2 Dyno Contoller at the current software
version.
• Media access is stopped.
Related Links
Compatible Grass Valley products on page 19
About K2 Dyno Replay Controller modes
The K2 Dyno Reply Controller operates in the following modes:
• Dyno mode – The Dyno application is open for normal operations such as capturing
and replaying highlight clips.
• Maintenance mode – The Dyno application is closed and the Windows operating
system desktop is available for system tasks such as network configuration and
software update.
By default, the K2 Dyno Replay Controller is in the Dyno mode. You must manually
put the unit in the maintenance mode, which requires a restart. Once you are in the
maintenance mode, if you shutdown or restart, you are prompted to confirm the switch
back to the Dyno mode at next startup. You can also choose to stay in the maintenance
mode at next startup.
Uninstall K2 Dyno Controller Client software
1. On the K2 Dyno Controller, switch to the maintenance mode as follows:
a) At the startup screen, press the Shift button and then touch SHUTDOWN.
b) Touch MAINTENANCE MODE.
The K2 Dyno Client software closes and the Windows OS desktop is
displayed after a restart.
66 K2 Version 7.2.7 Release Notes & Upgrade Instructions 12 May 2010
Upgrading K2 systems
To Next Page
Loading...
