8. Depending on the state of the system when upgrading, you might see one or more
of the following screens or messages as you work through the installation wizard.
Proceed as instructed, and then continue with this procedure:
a) If one or more messages appear referring to “…has not passed Windows logo
testing…”, you can safely continue. This is a normal part of the upgrade.
Click Yes or Continue… to allow the installation to progress.
b) If installation progress stops after about a minute and does not proceed, look in
the Windows taskbar for a Hardware Update Wizard window that has opened.
74 K2 Version 7.2.7 Release Notes & Upgrade Instructions 12 May 2010
Upgrading K2 systems
To Next Page
Loading...
