7. To modify planned settings, do the following:
a) Select the network settings and click Edit.
The Edit IP Address dialog box opens.
b) Edit IP address settings as follows:
For network interface Control ConnectionSetting...
Control is requiredNetwork
Static is recommended.Address Allocation
The IP address for this interface on the network. Required.IP Address
For network interface FTP ConnectionSetting...
Streaming is requiredNetwork
Static is required.Address Allocation
The IP address for this interface on the network. Required.IP Address
For basic SAN K2 Media Server any network interface of type iSCSISetting...
iSCSI (non-Redundant) is requiredNetwork
Static is required.Address Allocation
The IP address for this interface on the network. Required.IP Address
For redundant SAN K2 Media Server A any network interface of type
iSCSI
Setting...
iSCSI (Primary Redundant) is requiredNetwork
Static is required.Address Allocation
02 February 2012 K2 SAN Installation and Service Manual 107
Planning and implementing a K2 SAN with SiteConfig
To Next Page
Loading...
