Configure Define Server Roles page - Basic K2 SAN
1. Enter the name for the K2 Media Server, as currently configured on the machine.
2. Select all roles, except as follows:
If the K2 SAN has one or more optional NH servers, then FTP traffic should go to the NH server,
not the K2 Media Server you are now configuring. In this case, do not select the FTP server role
or the NAS server role
3. Click Next.
The Software Configuration page opens.
02 February 2012 K2 SAN Installation and Service Manual 133
Configuring and licensing the K2 SAN
To Next Page
Loading...
