• Disks bound
1. If you have not already done so, launch Storage Utility from the K2Config application.
2. As prompted, wait while Storage Utility gathers system information, then Storage Utility opens.
3. In Storage Utility, click Tools | Make New File System.
The Setting dialog box opens.
4. For a Nearline system, enter zero as the Real Time Input/Output (RTIO) rate.
5. Leave Windows Security unchecked.
6. Click OK.
The Configuration File dialog box opens.
The configuration file for the media file system is displayed.
220 K2 SAN Installation and Service Manual 02 February 2012
Configuring and licensing the K2 SAN
To Next Page
Loading...
