The Software Configuration page opens.
Configure Software Configuration page - NH server
This page checks for the software required to support the roles you selected on the previous page.
NOTE: MPIO software is required on K2 Media Servers in nearline redundant systems.
1. If software with Yes in the Required column reports as Not Installed, install the software.
2. Click Check Software.
3. When all required software reports as Installed, click Next.
The Network Configuration page opens.
Related Topics
Installing Multi-Path I/O Software on page 232
224 K2 SAN Installation and Service Manual 02 February 2012
Configuring and licensing the K2 SAN
To Next Page
Loading...
