• Each K2 RAID storage chassis is connected to all four zones. For example, connect RAID chassis
1 as follows:
• Connect controller 0 port HP0 to switch A port 1 (Zone 1)
• Connect controller 0 port HP1 to switch A port 9 (Zone 2)
• Connect controller 1 port HP0 to switch B port 1 (Zone 3)
• Connect controller 1 port HP1 to switch B port 9 (Zone 4)
Connect RAID chassis 2, 3, and 4 similarly.
02 February 2012 K2 SAN Installation and Service Manual 353
Custom K2 SAN systems
To Next Page
Loading...
