July 28, 2008 K2 Media Client Service Manual 127
CPU motherboard replacement
❑
X Restart If a Windows Activation message appears, click Resolve
Later
.
❑
X Do Windows setup “Restoring from the generic recovery disk image on E:” on
page 73, step 24.
❑
X Restart If a Windows Activation message appears, click Resolve
Later
.
❑
X X X Make motherboard CMOS
settings
“Making motherboard CMOS settings” on page 65
❑
X Restart If a Windows Activation message appears, click Resolve
Later
.
❑
X Configure default network
settings
“Restoring network configuration” on page 44
❑
X Restore system-specific
network settings
Use standard Windows procedures. Restore the settings you
saved earlier in this process. Copy the host file to
C:\WINDOWS\system32\drivers\etc\hosts.
❑
X Install K2 system software Follow instructions in K2 Media Client Release Notes for
your version of K2 system software.
❑
X Restart Cancel AppCenter login. Ignore AppCenter error messages.
If a Windows Activation message appears, click
Resolve
Later
.
❑
X Install SNFS software. Follow instructions in K2 Media Client Release Notes for
your version of K2 system software.
❑
XRun snfsRegistry.exe Find this file at C:\K2supportapps\SNFS\SNFSRegistry
❑
X Start the media file system From the Windows desktop, click Start | StorNext | Start
File System Services
❑
X Restart If a Windows Activation message appears, click Resolve
Later
.
❑
X Restore configuration files Overwrite C:\profile\config with the copy you made earlier.
❑
X X X Re-license Grass Valley
software
Refer to K2 Media Client Release Notes for licensing
instructions.
Licenses are keyed to MAC address. The replacement
motherboard has a new MAC address, therefore your
current licenses no longer work. You must request new
licenses for the license types you noted earlier in this
process.
❑
X If you have the 50 MB option,
reapply.
Run the Codec Upgrade License CD.
❑
X If a SAN client, add back to
the K2 Storage System and
restore iSCSI network and
load balancing settings.
Refer to the K2 Media Client System Guide for K2 System
Configuration application procedures. Restore the settings
you saved earlier in this process.
Do task if faulty
motherboard is:
Task InstructionsType I Type II Type III
To Next Page
Loading...
