July 28, 2008 K2 Media Client Service Manual 47
Identify adapters
and enumerated after the motherboard ports.
External storage K2 Media Clients with the optional Fibre Channel card
installed have only two adapters.
3. For each adapter name shown, verify that the adapter name is mapped correctly to
a physical port, as follows:
a. Under Network adapters, right-click an adapter and select
Properties. The
Properties dialog box opens.
4. Select the
Link tab and then click Identify Adapter. The Identify Adapter dialog box
opens.
5. Click
Start.
To Next Page
Loading...
