GRASS VALLEY K2 - Dell 2950 for Level 3 Redundant K2 SAN

40 K2 Storage Cabling Guide 03 September 2009
Chapter 2 Cable K2 devices
Dell 2950 for Level 3 redundant K2 SAN
These cabling instructions apply to the following:
• Dell 2950 PowerEdge Server with two iSCSI interface adapters (TOEs) on a Level
3 redundant K2 SAN.
PCI 1
PCI 2
PCI 3
Gb 1Gb 2
Fibre Channel
to RAID controller
PCI 1
PCI 2
PCI 3
Gb 1Gb 2
Fibre Channel
to RAID controller
PCI 1
PCI 2
PCI 3
Gb 1Gb 2
To control port
on GigE switch A
FTP: To control port
on GigE switch A
To control port
on GigE switch B
FTP: To control port
on GigE switch B
Fibre Channel
to RAID controller
PCI 1
PCI 2
PCI 3
Gb 1Gb 2
1A
2A
1B
2B
Heartbeat
cable
(serial)
To media (iSCSI)
ports on GigE switch A
To media (iSCSI)
ports on GigE switch A
To media (iSCSI)
ports on GigE switch B
To media (iSCSI)
ports on GigE switch B
To control port
on GigE switch A
Media File System Server
Media Database Server
iSCSI Bridge
Roles:
Media File System Server
Media Database Server
iSCSI Bridge
Roles:
FTP Ser
v
er
iSCSI Bridge
NAS Server
Roles:
FTP Server
iSCSI Bridge
NAS Server
Roles:
To control port
on GigE switch B
Fibre Channel
to RAID controller