GRASS VALLEY K2 - Dell R610 GS for Level 10 Basic K2 SAN; Dell R610 GS for Level 10 Redundant K2 SAN; Dell R610 GS for Level 20 Basic K2 SAN

42 K2 Storage Cabling Guide 03 September 2009
Chapter 2 Cable K2 devices
Dell R610 GS for Level 10 basic K2 SAN
These cabling instructions apply to the following:
• Dell R610 PowerEdge Server on a Level 10 basic (non-redundant) K2 SAN.
Dell R610 GS for Level 10 redundant K2 SAN
These cabling instructions apply to the following:
• Dell 1950 PowerEdge Server on a Level 10 redundant K2 SAN.
Dell R610 GS for Level 20 basic K2 SAN
These cabling instructions apply to the following:
• Dell R610 PowerEdge Server on a Level 20 basic (non-redundant) K2 SAN.
To media (iSCSI)
port on GigE switch
Fibre Channel
to RAID controller
To control port
on GigE switch
FTP: To control port
on GigE switch
A
B
To media (iSCSI)
port on GigE switch A
Fibre Channel
to RAID controller 0
To media (iSCSI)
port on GigE switch B
Fibre Channel
to RAID controller 1
To control port
on GigE switch A
FTP: To control port
on GigE switch A
To control port
on GigE switch B
FTP: To control port
on GigE switch B
Heartbeat
cable
(serial)
To media (iSCSI)
ports on GigE switch
Fibre Channel
to RAID controller
To control port
on GigE switch
FTP: To control port
on GigE switch