GRASS VALLEY K2 - Dell 1950 NH1 for Redundant Nearline K2 SAN; Dell R610 NH1 for Online K2 SAN; Dell R610 NH1 for Basic Nearline K2 SAN

03 September 2009 K2 Storage Cabling Guide 47
Dell 1950 NH1 for redundant nearline K2 SAN
Dell 1950 NH1 for redundant nearline K2 SAN
These cabling instructions apply to the following:
• Dell 1950 PowerEdge Server NH1 on a redundant nearline K2 SAN.
Dell R610 NH1 for online K2 SAN
These cabling instructions apply to the following:
• Dell R10 PowerEdge Server NH1 on an online K2 SAN.
Dell R610 NH1 for basic nearline K2 SAN
These cabling instructions apply to the following:
• Dell R10 PowerEdge Server NH1 on a basic (non-redundant) nearline K2 SAN.
12
Gb 2Gb 1
Fibre Channel to
RAID controller 1
Fibre Channel to
RAID controller 0
To control port
on GigE switch A
FTP: To control port
on GigE switch A
12
Gb 2Gb 1
Fibre Channel to
RAID controller 1
Fibre Channel to
RAID controller 0
To control port
on GigE switch B
FTP: To control port
on GigE switch B
A
B
Fibre Channel
to RAID controller
To control port
on GigE switch
FTP: To control port
on GigE switch
Fibre Channel
to RAID controller
To control port
on GigE switch
FTP: To control port
on GigE switch