GRASS VALLEY K2 - K2 RAID for Redundant K2 SAN

56 K2 Storage Cabling Guide 03 September 2009
Chapter 2 Cable K2 devices
K2 RAID for redundant K2 SAN
These cabling instructions apply to the following:
• Level 3 (NEC 1400) K2 RAID on a Level 3 redundant K2 SAN.
To K2 Media
Server 2B
DL1
Primary
Expansion 1
Expansion 2
Set address to 0 Set address to 0
Set address to 1 Set address to 1
DL1
To K2 Media
Server 1B
To K2 Media
Server 2A
To K2 Media
Server 1A
To control port
on GigE switch A
To control port
on GigE switch B
NOTE: Use this cable/address
pattern for one or two expan-
sion chassis only. For more
expansion chassis you must
use a different pattern, as
specified in the K2 Storage
System Instruction Manual.