GRASS VALLEY K2 - Page 45

October 19, 2008 K2 Storage System Version 3.2.74 Release Notes 45
Configuring the K2 Coder
default as your Import Watch Folder K2 bin. Doing so causes an import/export
loop.
NOTE: Do not configure the same bin as both the Import Watch Folder bin and the
Export Watch Folder bin.
5. In the tree view under Target File, right-click the current preset and select
Delete.
6. In the tree view under Target File click
Add.
The Preset Editor opens.
7. Select the preset you want to use.
This preset specifies the format of the files as exported/transcoded out of the K2
system. Select one of default presets provided by the Coder software. Do not select
one of the default K2 presets provided by Grass Valley.
8. Click
Update, OK and OK to save settings and close.