93
Specifications
Kahuna Maverik Specifications
MAV-GUI
Connector Description
Power Supply 2x PSU Connectors - Kycon KPPX 4 Pin or Compatible
12V DC 8.33A
Video Output 1x Monitor Output
USB 2x USB 2 Connectors
Network 1x 10/100/1000 base T, Auto - MDX/MDXI on RJ45 connectors
Connections to
MAV modules
8x RJ45 connectors for Comms and 2x +12V 0.42A power supply
Connection to other MAV modules
NOT Ethernet, connections must be direct to MAV modules. Do Not use network
switches or hubs.
CAT5 or above cables - crossover cables are Not suitable.
MAV Modules
Power and Comms Description
MAV-GUI
MAV-Trans
MAV-8Xpt-Del-OB
MAV-8Xpt-Del-FS
MAV-8Xpt-OB
MAV-8Xpt-FS
MAV-8Xpt AUX
MAV-DSK
MAV-JOY
MAV-KEYPAD
MAV-UFBPAD
MAV-8 Aud Fader
Each MAV has 2x RJ45 connectors (one for Input and one for Output) for
Comms and 12V 0.83A in and +12V 0.42A out
NOT Ethernet.
CAT5 or above cables - crossover cables are Not suitable.
Power Supplies
Power Supply Description
To the MAV-GUI 2x Fully independent external PSU modules with separate mains power feeds via
2x 10A IEC leads.
Output from each PSU = 12V DC 100W via Kycon KPPX 4 Pin or Compatible
connectors to the MAV-GUI.
2 supplied as standard per MAV-GUI, One PSU provides Dual Redundancy.
MAV-GUI External Mains Power Supply Requirements
Voltage 100V - 240V 50/60Hz
Power Less than 120 Watts (per MAV-GUI)
To Next Page
Loading...
