GRASS VALLEY KAHUNA 9600 - Optional Rebate in Desk

18
Environment and Location
Mounting the Kahuna Maverik Control Surfaces into a Desk
Optional Rebate in Desk
The MAVRow frame can be rebated into the desk to make the Control Surface Flush with the
surface of the desk.
The Rebate has to be cut the entire way around the desk and cut to 5.9 mm (0.23 in).
5.9 mm [0.23 in]
Rebate in Desk
MAVRow Frame
Desk
Note: Creating a rebate in a desk is very difficult. It should only be
attempted by a qualified person or company.