29
Kahuna
Installation Manual
MAV-GUI and MAV Module Connections
MAV-GUI Connections
The MAV-GUI is the most important module in the control surface, they provide power and
Comms to all the other MAV modules and network connection to the Production Switcher
mainframe.
• The MAV-GUI has 2x external PSU connectors, one PSU can power the MAV-GUI, the
other PSU is for redundancy.
• The MAV-GUI has 2x network ports which connect directly to the switcher mainframe.
• The MAV-GUI can have up to 16x individual MAV modules connected to it.
8 Comms Ports
to connect to MAVs
on the control surface
Network Ports to
connect to the
switcher mainframe
External PSU
Connectors
MON (Monitor) Connector
2 USB Connectors
Underside of the
MAV-GUI
Silk Screen from the
under side of the MAV-GUI
Port 1
Port 2
To Next Page
Loading...
