31
Kahuna
Installation Manual
Connecting a Touch Screen Monitor
The MAV-GUI has a “monitor” output port on its underside near the USB ports, the monitor
port can be used to connect to an external “computer” touch screen or normal display monitor.
The external monitor will have to have a 1920 x 1080 display resolution and it is recommended
that the monitor be larger than 21 inches.
Touch screen monitor - once the external monitor is connected to the MAV-GUI, a USB control
lead (also connected to the MAV-GUI - shown above) is connected, allowing the touch screen
functions to be used.
Non- touch screen monitor - once the external monitor is connected to the MAV-GUI, a USB
mouse (also connected to the MAV-GUI - shown above) is used to control the soft MLC menus
on the monitor screen.
Underside of the
MAV-GUI
Silk Screen from the
under side of the MAV-GUI
MON (monitor) output port
MAV-GUI
MON (monitor) output port
USB port
When using a touch screen
*When using a non-touch screen monitor, connect a USB
Mouse to control the menus.
*When using a touch screen monitor, connect the USB lead
from the monitor to one of the USB ports on the MAV-GUI.
HDMI to DVI Lead
USB Lead
To Next Page
Loading...
