35
Kahuna
Installation Manual
Mav Remote Connections - continued
Diagram below shows the connector information for the Mav Remote
1
2
3
4
5
5
Mav Remote Connectors
Connector Description
1 PSU Connectors - Kycon KPPX 4Pin or Compatible
12V DC 8.33A
2 Monitor Output
3 2x USB 2 Connectors
4 10/100/1000 base T, RJ45 network connectors to the switcher mainframe
5 Connection to other MAV modules
NOT Ethernet, connections must be direct to MAV modules. Do Not use network
switches or hubs.
CAT5 or above cables - crossover cables are Not suitable.
To Next Page
Loading...
