50
Cabling and Connections
Output Fins
50GbE IPO50 Output Fin
Signals supported over RTP stream per output Fin Module with 2 x 50GbE QSFP Cages.
SMPTE 2110-20
4x 12Gbps Format Sources (ST2110-20/30/40)
SMPTE 2022-6
Outputs - 12x 1.485Gpbs Format Sources
Outputs - 12x 2.970Gpbs 1080p Format Sources
VSF TR-03 (SMPTE 2110)
Outputs - 12x 1.485Gpbs Format Sources
Outputs - 12x 2.970Gpbs 1080p Format Sources
SMPTE 2022-7
Outputs - 12x 1.485Gpbs Format Sources
Outputs - 12x 2.970Gpbs 1080p Format Sources
SMPTE 2042 (VC-2)
Outputs - 12x 1.485Gpbs Format Sources
Outputs - 8x 2.970Gpbs 1080p Format Sources
Ethernet Signals
QSFP + Optical 2x 50G Ethernet
Conforms to IEEE 802.3ba – 50Gigabit over fiber.
QSFP + connected Cable 2x 50Gigabit Ethernet over twin axial cables.
Output Configuration
Kahuna
Output
IPO
Spigot
UHD
Single Link
A1 Spigot 1
UHD
Spigot 1
A2 Spigot 2
A3 Spigot 3
A4 Spigot 4
A5 Spigot 5
UHD
Spigot 2
A6 Spigot 6
A7 Spigot 7
A8 Spigot 8
A9 Spigot 9
UHD
Spigot 3
A10 Spigot 10
A11 Spigot 11
A12 Spigot 12
A13 BNC 13
UHD
Spigot 4
A14 BNC 14
A15 BNC 15
A16 BNC 16
2x 50GbE QSFP Cages
1x RJ45 Network Port
4x SDI Output BNCs
Outputs 13 to 16
Note: The 50GbE IPO Fin can be
or
16 Spigots in 3G
or
3x 12G Spigots + 4x BNCs
or
4x 12G Spigots
configured in the following way,
depending on the Firmware:
12x Spigots + 4x BNCs in 3G
To Next Page
Loading...
