52
Cabling and Connections
Network Fin
Network Fin
Kahuna 9600 has 8 Neutrik RJ45 10/100/1000 base T network connectors on a single Network
Fin, another 8 are available if a second (optional) Network Fin is fitted.
There are 2 LED’s attached to each connector, the LED’s have different functions depending on
the type communication they are receiving, the list below describes the functions.
Connectors with XLR shells can be used to connect with these network connectors.
In each case LED - Lit = link, Flashing = traffic.
Top LED Bottom LED
1G bit (1000 base T):GREEN GREEN
100Mbit (100baseT):OFFGREEN
10Mbit (10baseT):YELLOWGREEN
No link:OFF OFF
Fin NET A
Fin NET B
2x USB2 Ports (on each Net Fin)
1x eSATA
Not Used
X1
X8
8x RJ45 Ports (on each Net Fin)
X1
X8
Left Side
Right Side
RJ45 Network connector
LED’s
Note: USB ports and eSATA ports can be used to connect external hard
drives or memory devices.
To Next Page
Loading...
