69
Kahuna
Installation Manual
Mav Remote External Power Supplies
The MAV Remote is supplied with 2 external 12V power supplies. One of the power supplies
powers the Mav Remote, the other is for redundancy.
The Power Supplies have NO user serviceable parts inside and are welded shut.
Do not attempt to open the power supply cases.
The power supply connector plug that connects to the Mav Remote is a 4 pin “Snap and Lock”
type, care should be taken when connecting and un-connecting from the Mav Remote.
Snap and Lock type connector
Note: Make sure that the mains power is turned Off before connecting the
PSU to the Mav Remote.
Note: Do not allow the power supplies to hang freely from the Mav Remote.
Make sure that the cables are not under any stress.
To Next Page
Loading...
