146 KARRERA K-FRAME — User Manual
Section 4 — Video Mix/Effects
Note The PART button is provided in the E-MEM & Timeline menu so the eDPM
Master E-MEM partition can be enabled/disabled.
eDPM Definable Sub-levels
The Master E-MEM eDPM sub-levels (eDPM Pri and eDPM Sec) can be
configured as Definable (controlled) or Not Assigned in the User Setups,
Suite Prefs, E-MEM Prefs, eDPM menu (see
Define E-MEM on page 270 for
information about defining/assigning E-MEM sub-levels).
The example in Figure 83 shows the two defined eDPM sub-levels in the
Master E-MEM Timeline for ME 3.
Figure 83. eDPM Sub-levels in the E-MEM Master Timeline
Using definable sub-Levels allows for the recall of eDPM effects from Local
E-MEM. For example, effects created for ME 1 can have the eDPM definable
sub-levels and will then run eDPM effects.
Assign Sources
Assigning sources for eDPM transform is done in the eDPM Mode Source
Ops, eDPM menu.
To Next Page
Loading...
