KARRERA K-FRAME — User Manual 189
Device Control
Device Control with the Menu
To control devices with the Menu Panel, touch Device, Control (Figure 102).
Figure 102. Devices Control Menu
Standard Cue To Begin, Stop and Play controls are available for all devices con-
figured for control. The Swap buttons transfer the control of devices
between panes.
Additional Rewind, Fast Forward, Var Play Speed, Mark and Jog Forward/Back con-
trols are available in the larger control pane on the left.
Clip Loading
External devices are controlled using various protocols (BVW, Odetics,
AMP). These protocols have different capabilities, and specific models of
external devices may support only specific protocols. The exact clip loading
procedures, if available, will vary depending on the device model and pro
-
tocol being employed.
In general, clips are loaded from the Devices Control menu by touching the
Program Clip data pad in a device control pane, and then selecting the clip
from the list displayed.
To Next Page
Loading...
