30 KARRERA K-FRAME — User Manual
Section 2 — Setting Panel Preferences
Table 5 shows the source to button mapping for the 3rd level for a 25 button
2ME system.
Table 6 shows the source to button mapping for the 4th level for a 25 button
2ME system.
Setting Control Panel Source Select Button Mapping
Preferences
Before setting Control Panel source select button mapping preferences,
Source Names have been defined in the Eng Setup, Source Definition menu
and Image Store channels are assigned to Aux Busses.
1. Touch User Setups, Panel Prefs, Button Mapping (Figure 10).
Button 23, 24 Shift, Shift Shift, Shift
Button 25 Delegate Delegate
Table 5. 2-ME/25 Factory Configured Source to Button Mapping 3rd Level
Panel Button (25) 3rd
Button 1-18 Source 37 - 54
Buttons 19-22 M1 B- M4 B
Button 23, 24 Shift, Shift
Button 25 Delegate
Table 6. 2-ME/25 Factory Configured Source to Button Mapping 4th Level
Panel Button (25) 4th
Button 1,2 Source 55,56
Buttons 3-8 IS 1A - IS 6A
Buttons 9,10 eDA,eDC
Buttons 11-14 Pg A - Pg D
Button 15 Blk
Button 16 Test
Buttons 17,18 Bg 1,Bg 2
Buttons 19-22 M1 D - M4 D
Button 23, 24 Shift, Shift
Button 25 Delegate
Table 4. 2-ME/25 Factory Configured Source to Button Mapping 1st and 2nd Levels
Panel Button (25)
1st
(Unshifted)
2nd
To Next Page
Loading...
