KARRERA K-FRAME — User Manual 39
Patching Engineering and Fixed Sources to Logical IDs
effects you created to USB Memory Stick. At the new facility, load these
files into that GV Switcher system. Do not load the Eng Setups of one
facility into the other, as this will overwrite that facility’s existing Engi
-
neering configuration.
Once the Suite Prefs and effects are loaded at the new facility, go to the
Source Patch menu and map the appropriate Engineering sources of the
new facility to the original list of Logical sources. Your effects should now
run as previously designed without having to edit or rebuild them. When
satisfied the effects run correctly at the new facility, save that Suite Prefs
under a different name for use the next time you use this facility. Do not
overwrite the original Suite Prefs, as you will need it when you return to
the original facility.
Patching Engineering and Fixed Sources to Logical IDs
1. Touch User Setup, Suite Prefs, Source Patch (Figure 16).
Figure 16. Source Patch Menu
2. Touch the Eng Sources/Fixed Sources button to select a source type.
To Next Page
Loading...
