390 KARRERA K-FRAME — User Manual
Section 8 — Advanced Operations
File Operations
ClipStore file transfers are performed in the ClipStore Library menu. Touch
Image Store, Library. Files can be imported or exported using the Copy/Paste
(or
Cut/Paste in the case of ClipStore to ClipStore folder transfers) buttons
in the To and From ClipStore and Disk/Folder menu tabs (
Figure 240).
Note File renaming is not supported in the ClipStore Library menus.
File transfers can be performed from/to the following locations from the
GV Switcher Menu Panel:
• ClipStore Server,
• Image folder on the GV Switcher Menu Panel,
• USB Storage Devices (seen as Removable Disks) and
• External USB Disk Drives (seen as Hard Disk Drives).
USB storage devices can be inserted into the USB ports on both the Clip-
Store server and on the GV Switcher Menu Panel. Memory Sticks will be
seen as Removable Disks and will be displayed in the From Disk/Folders
and To Disk/Folders menu tabs. External USB Disk Drives will also be seen
in the From and To Disk/Folders menu tabs however first a shared folder
is needed on the device (see
Creating a Shared Folder for External USB Disk
Drives on page 391).
Figure 240. ClipStore Library Menu—File Transfer
To Next Page
Loading...
