GRASS VALLEY KARRERA K-FRAME - Updating a Show File

KARRERA K-FRAME — User Manual 57
Show Files
4. To only load selected files in a show, touch the Choose Load button to
bring up the Crate Show pane that allows you to see what files are
contained in the Show, and choose which files to load by touching the
File Type buttons.
5. In the Create Show pane, touch to select/deselect file types, or touch
the
Select All button (e-DPM is an option, if not installed the button will
be inactive).
6. Select the register data pad (left of each button) and enter a series or
range of registers to be included in the Show file (the default is all).
Note A best practice is to set the E-MEM range from 0-999 each time there is an
update, this will ensure that new registers are included (the same practice can
be applied to other file types).
7. Touch the Load button in the Create Show pane to load the Show file (not
the
Load Show button as this will load the entire Show file without your
File Type selections).
Updating a Show File
1. Touch File Ops, Show Files (Figure 24).
Figure 25. Update Show File Operations