GRASS VALLEY KARRERA K-FRAME - Deleting Source Memory from a Keyer

98 KARRERA K-FRAME — User Manual
Section 4 — Video Mix/Effects
Deleting Source Memory from a Keyer
1. Select a keyer source with learned Source Memory on a keyer bus,
using the Control Panel and/or Source Ops menu.
2. Go to the Keyer/Mode menu and select that keyer. The Source Memory
button will be illuminated.
3. Touch the Source Memory button. The Source Memory window appears
(
Figure 50).
Figure 50. Source Memory Window
4. Touch the Delete button. The Source Memory delete options window
appears (
Figure 51).
Figure 51. Source Memory Delete Options