KARRERA — Installation & Service Manual 139
Engineering Setups
Setting the Summit/Solo IP Address
For more information, see the Summit/Solo manuals packaged with the
system.
Remote Desktop Connection
To create a Remote Desktop Connection with the Summit/Solo, perform
the following:
1. Minimize the Karrera Menu on the Menu Panel (or PC).
2. Beginning with the Start button in Windows XP, touch Start, Programs,
Accessories, Remote Desktop Connection.
3. Enter the current IP Address for the Summit/Solo server. (default IP
Address: 192.168.0.180) in the Remote Desktop Connection dialog.
4. Touch Connect.
5. Enter the following in the Log On to Windows dialog:
•Login: administration
•Password: adminK2, touch enter.
The Elite AppCenter application window is displayed.
Changing the Summit/Solo IP Address
To change the Summit IP Address, perform the following:
1. Disable the FBWF (File Based Write Filter)
a. Click on the Start menu and navigate to All Programs, Grass Valley.
b. Click on Write Filter Utility (top of list).
The FBWF Manager is displayed (Figure 90).
To Next Page
Loading...
