174 KARRERA — Installation & Service Manual
Section 5 — Basic Configuration
Operators should also test any EMEMs, RMEMs, or other items created or
saved previously to be sure they work properly with their currently
acquired resources.
Eng Setup Menu Summaries
Brief descriptions of the various Engineering Setup menus are presented
here for reference.
Eng Login Menu
Figure 121. Eng Login Menu
A Karrera system can be configured as two suites, with each suite having
up to two control surfaces. The Eng Login menu is used to choose which
suite and control surface the Karrera Menu will interact with and control.
To access a different Suite or Control Surface (CS), go to the Eng Setup,
Eng Login menu and touch the Change Identity button (Figure 121). The Suite
and CS buttons will then be available for selection. After selecting a dif-
ferent button, a warning message appears. Select Yes to make the change,
or
No to cancel the change and retain the existing Menu identity.
To Next Page
Loading...
