KARRERA — Installation & Service Manual 229
Karrera Software Option Authorization
not have valid authorization codes you will need to acquire them from the
Grass Valley.
1. Go to the Install Options menu by touching Eng Setup, Install Options
(
Figure 166).
Figure 166. Install Options Menu
2. Write down the System ID displayed on the upper left portion of the
menu.
3. If you have more than one Karrera system, repeat the above steps on
every system that will have options enabled.
4. Contact Grass Valley Customer Support and request a code for each
Karrera System ID. If options have not already been purchased, you can
order the options directly from the service representative.
Enter Permanent Authorization Code
1. Go to the Install Options menu (Eng Setup/Install Options) on a Menu
Panel of the system whose options you are enabling (
Figure 166 on
page 229). Confirm that the System ID on the menu matches the System
ID# of the authorization code.
2. Touch the Perm button in the Option Group pane.
To Next Page
Loading...
