250 KARRERA — Installation & Service Manual
Section 7 — Maintenance
lems, which may be overcome, perhaps only temporarily, by clearing the
NV Memory.
Note You should have backup copies of your configuration and EMEM files com-
patible with your current software version so they can be restored after the
NV Memory is cleared.
Clear VP Frame NV Memory Procedure
1. Launch the GV Switcher Installer program via its desktop icon
(
Figure 198), or run the KarreraInstaller.exe file included on the Karrera
Software USB stick.
2. Navigate to the Video Processor Frame whose NV Memory you wish to
clear (
Figure 199).
Figure 199. DIP 1 Reset Karrera Frame Selected
3. Click on the Clear NV button. The following Clear NV Files screen will
appear (
Figure 200).
Figure 198. Installer Icon
To Next Page
Loading...
