GRASS VALLEY KARRERA - Creating a New Macro

260 KARRERA — User Manual
Section 7 — Advanced Operations
Insert Comment—Inserts an editable comment after the selected line; com-
ments do not effect macro performance
Inserting a Macro Delay
1. Touch the Insert Delay button.
2. Touch the Enter Delay data pad and enter the value in the pop-up
numeric keypad, for Fields or Frames or Seconds.
3. Touch Enter.
Figure 140. Enter Delay Dialog
Creating a New Macro
Creating a new macro can be done in the Macro Editor, however it may not
be practical. It is recommended that you learn about Tiers, Groups, and
component locations using existing macros first.
To create a new macro:
1. Touch an empty macro register in the Macros, Catalog menu.
2. Touch the Insert New Line button in the Macro Line Edit menu
(
Figure 139), the Component Edit menu is displayed (Figure 136).
3. Choose the Tier 1, Tier 2, Tier 3 (if necessary) levels by touching those
buttons.
4. Choose the Group, Location, and Component by touching those
buttons.
5. Touch the Edit Value button to set the value for the component.
6. Touch Apply.
7. Touch Save.
Repeat the above steps for each line of the macro.