298 KARRERA — User Manual
Section 7 — Advanced Operations
Image Store (Stills)
With Karrera Image Store, you can capture or transfer still images to take to
air or use as part of an effect. Video, key, and paired video/key images can
be captured for playback with Image Store. JPEG, TIFF, BITMAP and
Kalypso (.gva/.gva) images are converted when transferred into the Image
Store Cache from disk. Image Store Channels 1-6 can be paired as
video\key pairs (three video/key pairs maximum). Images are assigned an
‘Image ID’ (either automatically or manually via keypad) and can be given
an ‘Image Name’.
Images can be selected and loaded from the Karrera Menu or Control
Panel, using the DCM (Device Control area) or the System Bar.
File Format
Locally, images are stored as a .KIF (Karrera Image Format) file (which is
compatible with the Kayenne Image Format).
Setup Information
For Engineering Setup information, see the Karrera Installation and Service
Manual.
Image Store Input Aux Delegate Mapping
Delegate Image Store inputs to the aux bus destinations in the System Bar
area (A1-A15):
1. Go to the Aux Delegate Mapping menu by touching User Setups, Panel
Prefs
, Aux Delegate Mapping (Figure 168).
2. Select an Aux button (1-15 in the Button/Delegation scrolling list).
3. Select an Image Store input (IS 1-IS 6) in the Image Store Inputs button
delegation column.
4. Repeat Steps 2 and 3 for up to six Image Store inputs.
To Next Page
Loading...
