332 KARRERA — User Manual
Section 7 — Advanced Operations
If Auto Load is on, the first clip in the resulting list will be loaded into the
selected channel. If Auto Load is off, or the search finds no clips, then no
clips will be loaded.
Playback
The Playback pane in the Image Store, Replay & Record, Clips menu pro-
vides playback and playback parameter controls for clips (Figure 194).
You can play a clip by loading it into a ClipStore channel and touching the
Play button, or by turning on the
Auto Start button and taking the channel
on-air (
Figure 194). For example, if you take the CS-1 channel on-air, either
as a background or keyer, the clip loaded into the CS-1 channel will play
automatically when the
Auto Start button is on.
You can loop a clip by touching the Loop button (highlights green) or mute
the audio of each channel individually with the
Audio Mute button
(
Figure 194).
Other controls include (Figure 194):
• Timecode data pad—Touch the Timecode data pad to enter a timecode.
•
Mark In/Mark Out buttons and data pads—Touch the Mark In/Mark Out
buttons to set the mark-in/mark-out to the current clip position, touch
the data pads to enter a Mark In or Mark Out point on a numeric
keypad.
•
Cue to In button data pad—Touch the Cue to In data pad and enter the
value.
•
Var Play Speed button and data pad—Var Play Speed button on, enables
variable speed play. Touch the data pad to enter the playback speed
value.
Device control buttons:
•Rewind
• Fast Forward
•Start of Clip
• Reverse Play
•Stop
•Play
• End of Clip
(The KF Trigs button is described in Replay with E-MEMs.)
Note All the functions listed above can be controlled by macros.
To Next Page
Loading...
