342 KARRERA — User Manual
Section 7 — Advanced Operations
The following rules apply to performing a Cut Edit operation during
recording:
• Making sub-clips is the only available operation.
• Only the Cut Edit type will be available.
• Changing the clip will not be possible from the menu during this oper-
ation.
Once recording has begun, you can touch the Edit mode button, set mark-
in/mark-out points, and create a sub-clip (see
Make Sub-clips from the
Current Clip on page 340).
A currently recording clip can also be loaded into another channel of Clip-
Store. From the other channel, sub-clips can be made from any part of the
recording without interrupting the record.
Build Editing
Build Editing (Figure 201) allows you to take elements from one long clip
or from multiple clips and make a sub-clip, including:
• Video and Audio (audio from a clip or .WAV file),
• Video (with embedded audio) and Key, or
• Video, Audio (audio from a clip or .WAV file), and Key.
CAUTION Audio files must be 48kHz/.WAV file format, other file types will not be
recognized by ClipStore.
To Next Page
Loading...
