118 Kayak — User Manual
Section 3 — Control Panels
RAM Recorder
In Ram Mode, the Effects Subpanel serves to control the internal RAM
Recorders.
To select the desired RAM Recorder channel for control, either toggle
through the channels by repeatedly pressing the Ram button, or hold down
the Ram button and select the according channel number.
Since the frames of a channel can be looked at as moving video or as inde-
pendent stills, the Bank button is used to toggle between Clip and Stillstore
Mode.
The display shows the channel number, and - depending on the mode -
status and the timecode or the number of the still.
When the Bank button is lit, Clip Mode is selected.
In Clip Mode each digit button in the keypad represent a tape motion com-
mand. The according command is indicated by a character or a graphical
symbol on the respective numeric keypad.
To Next Page
Loading...
