Kayak — User Manual 121
Effects Subpanel
A third difference is that in Default Mode (Kalypso/Zodiak), keyframes are
always inserted behind the cursor (
Insert After), while in DD Mode, they are
inserted before the cursor position (
Insert Before). In Default Mode both
methods are available with
Insert After being the default.
Some features of Kalypso/Zodiak are not implemented in the Default
Mode including “insert on the path”, non-linear paths, and
Kalypso/Zodiak’s multi-track system. “Insert on the path” means the
ability to insert a keyframe at a position between two keyframes without
changing the overall duration of the Timeline.
One last difference is that Default Mode handles any type of action in key-
frames, while DD Mode has several different types of objects in a Timeline,
such as Triggers, Waits, or Loops.
For DD Mode operating details refer to the section on E-MEM - DD Mode of
Operation on page 121.
For Default Mode operating details refer to the section on E-MEM - Default
Mode of Operation on page 133
E-MEM - DD Mode of Operation
In E-MEM mode the Effects subpanel serves for storing and recalling
switcher statuses and processes.
Figure 72. Subpanel Effects (DD Mode)
8447_23r0
To Next Page
Loading...
