Kayak — User Manual 123
Effects Subpanel
The secondary lettering of the buttons 0 ... 9 applies when existing timelines
are modified. The secondary lettering FREE of the
Clear button applies
when a register is selected. The secondary lettering NEXT of the
Enter
button applies when an assigned register is called.
In the following instructions only the applicable function of the double let-
tering is mentioned.
Display
If no editing function or store function is selected, the ?? digit display of the
subpanel may show the following indications:
No register is selected
REG ????
Register 24 is selected
REG 24
Register 24 is selected in Bank Mode
2. This corresponds to register 24.
Register 24 is empty.
REG B24
Register 05 is selected. The register
contains a snapshot and has no
particular name.
SNAP 05 SN05 ----
As above but in Bank Mode 0 with
hotkey 5
SNAP B05 SN05 EFGH
Register 05 is selected. The register
contains a snapshot with the name
“ABCDEFGH”. The name can only be
entered in the menu.
SNAP 05 ABCD EFGH
As above but in Bank Mode 0 with
hotkey 5
SNAP B05 ABCD EFGH
Register 16 is selected. The register
contains a timeline and has no
particular name.
TL 16 TL16 ----
As above but in Bank Mode 1 with
hotkey 6
TL B165 TL16 ----
Register 16 is selected. The register
contains a timeline with the name
“KLMNOPQR”. The name can only be
entered in the menu.
TL 16 KLMN OPQR
As above but in Bank Mode 1 with
hotkey 6
TL B16 KLMN OPQR
To Next Page
Loading...
