GRASS VALLEY Kayak - Deleting Snapshots and Timelines; Dissolve Functions Depending on Snapshot or Timeline Preselection; Storing a Snapshot

Kayak — User Manual 125
Effects Subpanel
If the register shown in the display is to be used, no further selection is nec-
essary.
To select the next used register, press the
NEXT button.
To select a particular register, enter a one- or two-digit number with the
numeric keypad. If a two-digit number is entered (e.g. 15), the related reg-
ister (1) appears in the display when the first digit (1) has been entered. The
desired register (15) appears after the input of the second digit.
The input of the figures need not be confirmed with
Enter.
Storing a Snapshot
1. Set the switcher in the desired operation mode.
2. Set Define memo.
3. Press Store.
4. Select register with numeric key pad.
5. Press Enter.
Deleting Snapshots and Timelines
1. Press Clear.
2. Select other register (0 ... 99). Only if not already displayed.
3. 3. Press Enter.
Dissolve Functions Depending on Snapshot or Timeline Preselection
Note Timelines that contain an endless loop or that are waiting for an event (GPI,
Time) can be recalled only with Cut.
Table 6. Table Dissolve Functions
Button Snapshot preselected Timeline preselected
Auto Dissolve to the snapshot in the time
set with Trans dur.
Playing the timeline in the time set
with Trans dur.
Cut or Hotkey in Bank mode Recall the snapshot Playing the timeline in the stored time.