126 Kayak — User Manual
Section 3 — Control Panels
Other Button Functions
Trans Dur
Entry of the Auto transition duration.
1. Hold down the Trans dur button and press the E-MEM button.
2. Enter transition duration with numeric keypad.
The time is indicated in the
FRAMES display.
3. Complete the entry with Enter or Trans dur again.
Auto Recall
When Auto Recall is active, the recall of a snapshot or timeline will restore
the Define Memo in the same state, which was active when the register was
stored.
Undo
If you press this key, the status before the last recall of a snapshot or a time-
line can be restored even if several other operations have been performed
in the meantime.
Cut / Pause
Function of the button:
• If the E-MEM is not playing a timeline and a snapshot register is
selected
Cut recalls the snapshot.
• If the E-MEM is not playing a timeline and a timeline register is
selected,
Cut starts playing the timeline.
• If the E-MEM is playing a timeline,
Cut pauses playing the timeline;
another
Cut continues playing the timeline.
• If the E-MEM is playing a timeline and the timeline is waiting,
Cut con-
tinues playing the timeline.
Auto / Abort
Function of the button:
• If the E-MEM is not playing a timeline and a snapshot register is
selected,
Auto interpolates to the snapshot in a fixed period of time (Set
by Trans Dur).
• If the E-MEM is not playing a timeline and a timeline register is
selected,
Auto starts playing the timeline in a fixed period of time. This
only works if the timeline has no endless loops or waits and a transition
duration other than 0 has been selected.
To Next Page
Loading...
